Compare any two graphics cards:
Radeon HD 6570 (OEM) 2GB vs Radeon R9 M375X
IntroThe Radeon HD 6570 (OEM) 2GB features a GPU core speed of 650 MHz, and the 1024 MB of GDDR5 RAM is set to run at 1000 MHz through a 128-bit bus. It also is comprised of 480 SPUs, 24 TAUs, and 8 ROPs.Compare all of that to the Radeon R9 M375X, which makes use of a 28 nm design. AMD has clocked the core frequency at 1015 MHz. The GDDR5 memory is set to run at a frequency of 1125 MHz on this specific card. It features 640 SPUs as well as 40 Texture Address Units and 16 Rasterization Operator Units.
Display Graphs
Power Usage and Theoretical BenchmarksMemory BandwidthThe Radeon R9 M375X should theoretically be a small bit faster than the Radeon HD 6570 (OEM) 2GB in general. (explain)
Texel RateThe Radeon R9 M375X will be much (approximately 160%) more effective at AF than the Radeon HD 6570 (OEM) 2GB. (explain)
Pixel RateThe Radeon R9 M375X will be quite a bit (approximately 212%) more effective at full screen anti-aliasing than the Radeon HD 6570 (OEM) 2GB, and able to handle higher screen resolutions more effectively. (explain)
Please note that the above 'benchmarks' are all just theoretical - the results were calculated based on the card's specifications, and real-world performance may (and probably will) vary at least a bit. Price Comparison
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though. Specifications
Display Specifications
Memory Bandwidth: Memory bandwidth is the maximum amount of data (measured in megabytes per second) that can be transported over the external memory interface within a second. It's calculated by multiplying the interface width by the speed of its memory. If it uses DDR RAM, the result should be multiplied by 2 once again. If it uses DDR5, multiply by ANOTHER 2x. The higher the card's memory bandwidth, the better the card will be in general. It especially helps with AA, HDR and higher screen resolutions. Texel Rate: Texel rate is the maximum amount of texture map elements (texels) that are processed per second. This number is calculated by multiplying the total amount of texture units of the card by the core speed of the chip. The better the texel rate, the better the graphics card will be at texture filtering (anisotropic filtering - AF). It is measured in millions of texels applied per second. Pixel Rate: Pixel rate is the maximum amount of pixels the graphics card can possibly record to the local memory in one second - measured in millions of pixels per second. The number is calculated by multiplying the amount of Raster Operations Pipelines by the clock speed of the card. ROPs (Raster Operations Pipelines - also called Render Output Units) are responsible for filling the screen with pixels (the image). The actual pixel fill rate also depends on lots of other factors, especially the memory bandwidth of the card - the lower the memory bandwidth is, the lower the ability to get to the maximum fill rate.
Display Prices
Please note that the price comparisons are based on search keywords - sometimes it might show cards with very similar names that are not exactly the same as the one chosen in the comparison. We do try to filter out the wrong results as best we can, though.
|
Comments
Be the first to leave a comment!